The circuit breaker panel controls the electricity throughout your entire home. It houses all the circuit breakers that appliances, electrical outlets, and computers are connected to. That’s why it is important to call a Myrtle Beach electrician whenever there’s a problem with your electrical panel. Yes, there are DIY solutions but doing your own electrical repairs is generally not advised since there are certain risks involved in working with electricity. On the other hand, anyone is welcome to try them out but always be careful and keep safety in mind.
Here are some steps to troubleshoot breaker panel problems:
The most common problems you can face with your electrical panels are breaker issues. It does not happen often that your circuit breaker trips frequently. If the circuit breaker trips more often than not, there is a problem. It could be that the breaker in question is faulty or the culprit is somewhere down the line. An electrician will figure out what’s causing the problem and put an end to the issue. However, you can try to solve the problem on your own.
Most of the time, the circuit breaker just needs to be properly reset. Here are some steps on how to accomplish just that:
1. Carefully open your electrical panel and check the breakers in question. If possible, wear gloves to avoid electrocution. Bear in mind that the service panel handles high-voltage electricity. Never work on your electric panel unless you are completely capable and knowledgeable. If you hear any odd sounds, call your local electrician right away.
2. Locate the circuit breaker that you are trying to work on. There should be indicators on which circuit breakers are connected to certain areas of your home. Again, if this seems to be beyond your capacity, don’t hesitate to call an electrician.
3. If the circuit breaker has been tripped, try to rock it back and forth to see if there is a problem with the knob resetting. The circuit breaker switch must snap in place when you reset it.
4. Firmly set the circuit breaker in place. This will reset the connection and all affected areas will have electricity again. If the circuit breaker still trips, it is a sign that you need help from an electrical contractor.
Hire a reliable electrician to fix all of your electrical concerns
When you are experiencing any kind of electrical issues at home, your first action should be calling an expert like MB Electrician Pros. Always bear in mind that electrical problems require expert solutions. You can always try solving the problem on your own but it’s like opening a box of chocolates – you’ll never know what you’re going to get. For accurate and reliable solutions, hire an expert to take care of your electrical concerns.
Questions to ask your local electrician about circuit breakers
- Can you explain how circuit breakers work and their purpose in a home’s electrical system?
- What are the most common types of circuit breakers and when should each type be used?
- How can I determine if a circuit breaker is faulty and needs to be replaced?
- How often should circuit breakers be inspected or tested?
- Can you recommend any upgrades or additions to my current circuit breaker panel to improve the safety and efficiency of my home’s electrical system?
- Can you give me an estimate for the cost of installing new circuit breakers in my home?
- Can you tell me about the different types of ground fault circuit interrupters (GFCIs) and when they should be used?
- How can I safely reset a tripped circuit breaker?
- Can you explain the difference between a standard circuit breaker and an arc fault circuit interrupter (AFCI)?
- Can you walk me through the process of adding a new circuit to my home’s electrical system?
